What wattage is the best wattage for vape CBD? We have been asked this question all the time, and this is not a simple answer.

The important thing to remember when using CBD is that you don’t want to increase the wattage very high; this is because the coil will become too hot and eventually burn the CBD. When this happens, you are actually wasting CBD products. In addition, when you destroy the CBD, you will not get any benefits.

We recommend keeping your wattage Between 5-15 watts To get the best e-cigarette experience. This will also ensure that you get the most benefit from vaporable CBD products.

Taste adjustment method

In order to find the perfect wattage for your vape CBD, we recommend that you use a method that suits your taste. This means you can start with low power, which may be 5 watts. From there you can judge whether you like the amount of power and flavor.

If you are not satisfied, please turn it up to 10 watts and start the process again. Do this until you reach the wattage you like and keep it there. However, make sure not to exceed 15 watts.

List of methods to adjust taste:
satisfied? Do I like its taste? Am I still within the safe range of 5-15 watts to avoid burning CBD?

CBD electronic cigarette device

Now, how do you choose the perfect equipment to use with CBD? When you walk around or dig out all the existing e-cigarette devices, remember that there are many different e-cigarette devices on the market. In addition, there are many fuel tanks, atomizers, and ink cartridges, all of which are different.

Since many sub-ohm fuel tanks on the market today require coil heads with lower ohms, we recommend that you stay away from these. They require more wattage, which is exactly what you don’t want in e-cigarette CBD. If you really want to use your sub-ohm fuel tank, try to find a coil head with a higher ohm, such as 0.5 or higher.

Down system

In our opinion, the best device to use CBD is a pod system, and we will tell you why. There are coils in the Pod system. These coils are made with higher ohms, such as 1 ohm, and sometimes even 1.6 ohms.

The higher the ohm, the less wattage required to power the coil This is exactly what you are looking for when using CBD. Pod systems have a battery that is set to a specific wattage, and most systems cannot adjust that wattage.

The good news is that the output power of many of these pod systems is only between 10-15 watts, which is enough to take full advantage of your favorite e-cigarette CBD products.

Vaping CBD is not too difficult, but we want to point out some important key points, please keep in mind so that you can make the most of the wonderful compound called CBD.

Featured equipment in the video:

You might also like

Buy CBD Vape Juice